Elaso Grinding Wheel Balancing Systems

Balance grinding wheels dynamically, using existing wheel flange weights
Eliminate the costly, inaccurate method of manual balancing
Constantly monitor rpm and unbalance in either displacement or velocity
The processor calculates and displays the weights positions on the screen
The operator moves the weights to the indicated positions
Thanks to step by step guidance any operator can perfectly balance the grinding wheel
Available as desktop unit or insert module for machine panels
This unit is being phased out and is replaced with the ebm100 processor

Balance grinding wheels dynamically, using existing wheel flange weights
Eliminate the costly, inaccurate method of manual balancing
Constantly monitor rpm and unbalance in either displacement or velocity
The processor calculates and displays the weights positions on the screen
The operator moves the weights to the indicated positions
Thanks to step by step guidance any operator can perfectly balance the grinding wheel
Available as desktop unit or insert module for machine panels

High quality balancing system at an economical price
Easily retrofitted to surface, peripheral, and universal grinders
Constantly monitor rpm and unbalance in either displacement or velocity
LC-display guides operator through manual balancing at working spindle speeds
Automatically balance grinding wheel with the eb2000a system
No-contact power/signal transfer, dependable and simple use, requires no maintenance

Balancing and structure-borne sound system in modular design for highest demands
Can also be used as a balancing processor guiding the operator in placing the wheel weights
Control up to two balancing heads and up to four structure-borne sound sensors
Interfaces with machine controllers for a fully automatic controlled grinder
Structure-borne sound is displayed in relation to time, allowing an optimal process control
Sound parameter "amplification" is also adjustable via interface
Highly sensitive and fast acting to recognize the wheel with part contact within a few micrometers infeed
Up to eight storable parameter records facilitate a quick change for recurring parts
Many configurations are available to suit any given machine
Application example for the Voumard 300 CNC internal grinder

The eb4500 allows manual or fully automatic in-process balancing of grinding wheels
Brush type or maintenance-free no-contact collectors are available
Electrically isolated interface allows to communicate with a machine controller
The machine controls therefore the balancing aspect without operator activity
The eb4500 may be incorporated into a 19" rack
Please Note: The eb4500 controller replaces all original Meyer Ltd. systems MB1001, MB1002, EB4001, EB4002, EB4003, EB4004, EB5003, EB5004, and EB5005

Balancing and structure-borne sound (acoustic emission control) system for highest demands
Used for balancing grinding wheels, to increase production, and to monitor grinding processes
Short production runs and/or high accuracy requirements are areas where this unit is utilized
Highly sensitive, recognizes the contact between part and grinding wheel within a few micrometers infeed
Unit will integrate with a machine controller
Available with table top housing, remote operator interface, or for panel mounting
This unit is being phased out and is replaced with the ebg1500 types

The ems1000 is a modular balancing and structure-borne sound system
Displays the unbalance and structure-borne sound data on the machine's operator display
Integrated in the machine software, the unit is controlled through the machine operating system
Control and display would be programmed by the machine builder to become a part of the machine
The modular design permits a cost benefiting solution for each application
Through ProfiBus, RS232, RS485 allows the ems1100 to easily communicate with the machine controller
The ems1000 accepts up to six structure-borne sound sensors and up to two balancing heads

Process control for grinding machines utilizing structure-borne sound control
Benefits are: reduces air grinding time, indicates parts positions, and is used for crash protection
The sound signal is fed into two separate channels allowing each to be separately adjusted for offset and amplification
Unit features extremely fast reaction time and offers three selectable filters for signal optimization
Unit interfaces with machine controllers and allows installation in machine cabinets or operator panels
OEM or after market installation, for details please ask us