Phone: (001) 828.345.6030
Phone: 888.ASK CIRO
(toll-free within USA)
Fax: (001) 828.345.6013
Middex Wall-Mounted Step Motor Drivers
Middex BCD130-CAN Step Motor Driver
(Manual)
Type | | Wall mounted, DIN rail | |
Principle | | Bipolar chopper driver (2/4 phase) | |
Supply voltage | | 22...80VDC | |
Phase current, rated | | up to 8Aeff (11.3A peak) | |
Step resolution | | up to 25600 steps/revolution | |
Speed and target | | position and rpm may be changed any time | |
Synchronization | | fast between axes | |
External synching | | with external sensors, light barrier | |
Special functions | | to accommodate customer requests | |
CAN type | | CANopen to DS302 | |
Inputs | | for encoder, limit switch, reference switch, special functions, opto-decoupled | |
Ready state | | output, opto-decoupled | |
Middex SC5-CAN Din Rail Mounted Step Motor Driver
Type | | Wall mounted, DIN rail | |
Principle | | Bipolar chopper driver (2/4 phase) | |
Supply voltage | | 22...36VDC | |
Phase current, rated | | 3.5Aeff (4.9A peak) | |
Step resolution | | up to 1600 steps/revolution | |
Speed and target | | position and rpm may be changed any time | |
Synchronization | | fast between axes | |
External synching | | with external sensors, light barrier | |
Special functions | | to accommodate customer requests | |
CAN type | | CANopen to DS302 | |
Inputs | | for encoder, limit switch, reference switch, special functions, opto-decoupled | |
Ready state | | output, opto-decoupled | |
Middex DC4Q-CAN1 DC Motor Driver
Type | | Wall mounted, DIN rail | |
Principle | | for brush-type dc motors | |
Supply voltage | | 24...48VDC, no feed back to supply voltage | |
Current, rated | | up to 10A, short to 20A | |
Protection | | load resistor built-in | |
Rpm control | | analog input 0...10V | |
Type | | rxl control | |
Inputs | | "right", "left", 24V | |
Input | | encoder for positioning | |
Ready state | | output 24V | |
CAN type | | CANopen to DS302 | |
Size | | 36x112x145mm (WxDxH) | |